Machining service--Carbon Fiber CNC Service OEM Chassis with Countersink Holes.
Introduction
Carbon fiber VS metal
When design combination can't simple comparison of carbon fiber, copper, aluminum, or plastic properties,
because the material is the same (same characteristics of all points), has the same properties
(the characteristics of each axis is the same)., by contrast, the strength of carbon fiber on the axis
directionof it, on the direction of the characteristics of carbon fiber and maximum impact mechanical
properties of the base.Carbon fiber parts is comprehensive is neither uniform nor the direction.
The performance of carbon fiber and steel at the same time its weight and similar plastic close, so the
strength of the carbon fiber is lighter than (weight ratio) and the hardness is much higher than steel and
plastic.Construction and application of concrete depends on the details of the components, such as a foam
core layer has the very high bending strength than the weight, but not necessarily compression or extrusion
their structure is the only, so we can't use in your application of carbon fiber to replace the same
thickness of the steel.To determine the specific requirements of security and comfort of the products is the responsibility of the customer, this is through engineering analysis and experimental verification.
Specification
| Guide | The displacement speed | Positioning accuracy | Tolerance |
| Japan | 20m/min | 0.02mm/300mm | ±0.1mm |
Carbon fiber advantage nc machining characteristics
UV Resistant Inhibited
Environmentally Safe
Variety Of Colors For Choice
Non-Magnetic Electromagnetic
Consistent Cross Section
Dimensional Stability
The comparison of strength, hardness and other materials
Carbon fiber is very strong, this is typical of the strength of the engineering material weight ratio and
stiffness to weight ratio, particularly in the increased weight can lead to a life cycle cost or not satisfied
with the performance of structure design.Hardness of a material is measure by its elasticity coefficient,
the coefficient of carbon fiber typical values 20 msi (138 Gpa), and its maximum tensile strength values
are typical 500 ksi (3.5 Gpa).High strength and hardness of carbon fiber material also has a higher
application value and can be through the professional heat treatment process.Compared with the
2024 - T3 aluminum coefficient of typical values only 10 msi and the maximum tensile strength only 500
ksi typical values, and the coefficient of 4130 steel typical values is 30 msi and the maximum tensile
strength values are typical 125 ksi.
***Pictures shown below are only to display the carbon fiber CNC capability,experience and Quality from LijinCarbon.
LijnCarbon will NOT disclose or share any drawings or product detail to third parties.
Display
Product Tags:
|
|
Machining Carbon Fiber CNC Service OEM Chassis with motor seat Images
|
